Product use:
Constant temperature magnetic heating stirring is made based on normal magnetic heating stirrer,
new added constant temperature function, step-less speed regulation, convenient operation.
This liquid heating Magnetic stirring is applicable to modern petroleum, chemical, medical,
environmental, biochemical, experimental analysis, education and other scientific research units.
Structural Overview:
1. 85-2A model constant temperature magnetic heating stirring adopts fine direct current motor,
low noise, stable speed regulation,
2. Full closed heating plate is used for auxiliary heating use. It can be used for heating for a long term.
3. The muddler is made of PTFE and high-quality magnet steel, it has the function of high
temperature resistance, wear resistance corrosion resistance and with strong magnetic.
4. It can be used for mixing work in a closed vessel, very ideal and convenient for using.
5. It can be set the temperature and show the temperature directly, temperature display is intuitive
and accurate.
Use and Maintenance:
1. Put the bottle(or other containers) on the working table,which filled with solution and a stirrer inside.
2. Switch on the power switch, indicator will light.
3. Choose for heating,turn on the heating switch, the heating indicator will light, this means the heater
is working now.
4. Regulating the speed control knob to be a desired speed,bidirectional stirrer can be selected
according to actual needs of forward and backward.
5. After work, set the speed control knob at the lowest speed position, the heating switch is in
a non-working state, turn off the power switch,cut off the power supply.
6. Clean the working surface of the magnetic stirrer, make sure no water and dirt on it.
Note: The working power supply must have good provision for earthing.
Technical Details:
Model:85-2A
Speed control range: 0-2600r/min
Temperature Control Range:0-100℃
Temp Accuracy:±1℃
Heating power:250w
Motor power:25w
Work surface:Ø120mm
Working Power supply :220v/50Hz
Dimension:240*170*110mm
